Candy TR 31 RUFA User Manual download pdf (Page 13)

CLEANING

12 GB

Before cleaning or removing the hob, it is imperative to :

• disconnect the hob from the mains supply,

• let all parts of the hob cool down.

Never use :

harsh abrasives, scouring pads or sharp objects to clean the

hob.

• ENAMELLED STEEL HOB:

when the hob has cooled completely,

simply clean the enamelled hob with soapy water, rinse and wipe

with a clean dry cloth. If you clean the enamelled hob when it is

hot, you may tarnish it.

• STAINLESS STEEL:

clean with soapy water, rinse and dry. You can

use a special product to clean stainless steel which is available

from various retail outlets.

MAINTENANCE OF THE VITROCERAMIC or GLASS HOB

- Place a few drops of specially formulated hob cleaning solution

on the hob surface.

- Rub any stubborn stains with a soft cloth or with slightly damp

kitchen paper.

- Wipe with a soft cloth or dry kitchen paper until the surface is

clean.

If there are still some stubborn stains :

- place a few more drops of the hob cleaner on to the surface,

- scrape with a scraper*, holding it at an angle of 30° to the hob,

until the stains disappear.

- wipe with a soft cloth or dry kitchen paper until the surface is

clean.

- repeat the operation if necessary.

A scraper with a razor blade will not damage the surface, as long

as it is kept at an angle of 30°. Never leave a scraper with a razor

blade within the reach of children.

Frequent cleaning leaves a protective layer which is essential to

prevent scratches and wear.

Make sure that the surface is clean before using the hob again.

To remove marks left by water, use a few drops of white vinegar

or lemon juice. Then wipe with absorbent paper and a few drops

of the hob cleaner solution. Rinse and wipe up.

THE KNOBS -

Only clean with soapy water, rinse and dry well.

THE GAS BURNERS

For cleaning, it is recommended to remove all greasy or burnt

deposits with ammonia based products or usual cleaning products.

• The burner cap : it is simply placed on the burner. Remove the

pan support, the burner cap and clean it with a slightly soapy

sponge. Rinse and dry. The enamelled steel burner cap: do not

immerse it in cold water when it is hot, this will prevent the enamel

cracking as a result of thermal shock. The brass finish burner

cap: on using, the burner cap surface looses its brightness. For

current cleaning, it is recommended to remove all greasy or burnt

deposits with ammoniacal products or usual cleaning products.

To recove brass brightness, use a special cleaning product for

copper, brass or bronze currently sold in stores. Do not use this

specific product for cleaning of the knobs.

• The burner body : regular cleaning will maintain the appliance

original appearance. Clean with a soapy sponge, rinse and dry.

If the holes become clogged, brush the caps using soapy water

and dry with a clean cloth.

When re-assembling the burners, make sure that the burner

caps and the burners themselves are dry and after, seat them

correctly.

Be careful not to let any water get into the burners.

THE PAN SUPPORT

Depending on the model, the pan supports are made of chrome

steel, enamelled steel or cast-iron.

They are simply placed on the hob. Lift them up to remove them.

For the maintenance of the pan support, never use harsh abrasives,

scouring pads or sharp objects as this will cause irreparable

damage to the enamel.

When the pan support is cold, simply clean with soapy water,

rinse and dry with a clean cloth.

THE HOT PLATE

To burn off any cooking deposits heat the hob for a short time.

After switching off and the hot plate has cooled down, wipe it with

absorbent paper. It is important that the hot plate is protected from

moisture.

Do not use abrasive products.

To maintain and preserve its appearance, rub a drop of neutral

oil, such as sewing machine oil into the surface of the hot plate.

The hot plate should always be dry, or slightly greasy. If it is not

to be used for some time, remove any rust using emery paper

followed by a suitable commercially available product

for the maintenance of soil hotplates.

COVER

The cover is available as optional accessory.

Before closing the cover, to protect it from excessive temperature

changes, always wait until the burners or plates have completely

cooled down.

Any spillages should be removed from the cover before opening it.

AFTERCARE

Before calling out a Service Engineer please check the

following:

— that the plug is correctly inserted and fused;

— that the gas supply is not faulty.

If the fault cannot be identified:

switch off the appliance — do not tamper with it — call the Aftercare

Service Centre. The appliance is supplied with a guarantee

certificate that ensures that it will be repaired free of charge at

the Service Centre.

Chromed grids and burners

Chromed grids and burners have the tendency to dark with the

use.

This is a normal and inevitable phenomenon, but it doesn’t

jeopardize absolutely the functionality of the hob.

In anycase from our after sales service centre the spare parts are

available.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Comments to this Manuals

No comments

Candy TR 31 RUFA User Manual Page 13

Comments to this Manuals

Related products and manuals for Stoves Candy TR 31 RUFA