Candy CD 571 S NORD User Manual download pdf (Page 49)

97

The filter system (fig.A “4”) consists of:

a central container that traps the larger

particles.

a flat gauze that continuously filters the

wash water

a micro filter, located beneath the gauze,

that traps the tiniest particles ensuring a

perfect rinse.

To achieve excellent results every time, the

filters should be checked and cleaned after

each wash.

To remove the filter unit, simply turn the

handle anticlockwise (fig. 1).

For ease of cleaning, the central container is

removable (fig. 2).

Remove the gauze filter (fig.3) and wash the

whole unit under a jet of water. If necessary

a small brush can be used.

With the Self-cleaning Micro filter, mainte-

nance is reduced and the filter unit need only

be checked every two weeks. Nevertheless,

after each wash it is advisable to check that

the central container and the gauze filter are

not clogged.

NB: after cleaning the filters, make sure

that they are correctly reassembled and

that the gauze filter is properly positioned

at the bottom of the dishwasher.

Make sure that the filter is screwed back,

clockwise, into the gauze, as poor

seating of the filter unit could have an

adverse effect on the efficiency of the

appliance.

Warning: never use the dishwasher

without the filters.

Cleaning the filters

1

2

3

96

3

4

3

Filling the rinse aid container

The rinse aid container can be found to the

right of the detergent container: it has a

capacity of about 130 ml (Fig A "3"). Turn the

cap (3) anticlockwise and pour enough liquid

to last several washes, up to the maximum

level shown. Replace the cap.

The rinse aid, which is automatically

released during the last rinsing cycle, helps

the dishes to dry quickly and prevents spots

and stains forming.

It is always advisable to use rinse aid.

Check the rinse aid level through the indicator

eye which is situated in the centre of the

dispenser (4).

Regulating the rinse aid from 1 to 6

The regulator is placed under the cap (3) and

can be turned using a coin. The recommended

position is 3.

The limestone content of the water considerably

affects the formation of limescale and the

drying performance.

It is therefore important to regulate the

quantity of rinse aid to achieve good

washing results.

If, after the wash, streaks occur on the

dishes, decrease the amount by one position.

If whitish spots occur, increase the amount

by one position.

FULL EMPTY

dark light

1 2 ... 44 45 46 47 48 49 50 51 52 53

Comments to this Manuals

No comments