Candy GO DC 36-47 User Manual download pdf (Page 13)

The water removed from the laundry during the

drying cycle is collected in a container at the

bottom of the dryer.

When the container is full the ‘Plein’ indicator on

the control panel will light, and the container

MUST be emptied. However, we recommend that

the container is emptied after each drying cycle.

NOTE: Very little water will collect during the

first few cycles of a new machine as an internal

reservoir is filled first.

To remove the container

1. Gently pull the bottom of the kickplate so

that it unclips from the dryer. The top

section can then be unhinged allowing the

kickplate to be completely removed.

2. Pull firmly on the handgrip and slide the

water container out of the dryer.

Support the container with both hands. When

full, the water container will weigh about 4kg.

3. Open the lid located on the top of the

container and empty the water.

4. Refit the lid and slide the water container

back into position. PUSH FIRMLY INTO

PLACE.

5. Refit the kickplate by engaging the hinges

at the top and 'snapping' the lower clips

into place.

Water Container

40005088Eng.qxd 30/06/2007 17:52 Page 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

No comments

Candy GO DC 36-47 User Manual Page 13