Candy GO DC 68G Specifications download pdf (Page 16)

1. Open the door and load the drum with laundry. Ensure that garments do

not hinder closure of the door.

2. Gently close the door pushing it slowly until you hear the door 'click' shut.

3. Press the ‘Marche Arrêt’ button to switch on the dryer. The indicator will

light up and the START indicator will flash.

4. Turn the Programme Selector dial to select the required drying programme

(see Programme Guide).

5. If drying synthetics, acrylics or delicate items, press the ‘Séchage Délicat’

button to reduce the heat level.

The light above the push button will light up when the machine is in low

heat setting. To deselect this status when the drying cycle has started it is

necessary to reset the machine.

6. Press the ‘Départ’ button. The dryer will start automatically and the START

indicator will be continuously lit.

7. The display will show the drying progress in terms of time remaining.

8. If the door is opened during the programme to check the laundry, it is

necessary to press ‘Départ’ to recommence drying after the door has been

closed.

9. When the 15' indicator is lit the machine will enter the cool down phase,

the clothes will be tumbled in cool air allowing the load to cool down.

10. When the programme is complete the STOP indicator will light.

11. Following the completion of the cycle the drum will rotate intermittently

to minimise creasing. This will continue until the machine is reset or

switched OFF.

Cancelling and resetting the

programme

To cancel a programme switch the machine off and on again. The machine will

indicate that it has been reset by the START indicator flashing.

Buzzer Operation

The buzzer will operate when the selector is rotated and when function buttons

are pressed.

To cancel the operation of the buzzer, follow this sequence. Press and hold on

the Acrylic/Synthetic (Séchage Délicat) and Start (Départ) buttons and then turn

the machine ON using the ON/OFF switch (Marche Arrêt).

To switch the buzzer back on repeat the above sequence.

Operation

40005612Eng.qxd 07/07/2008 16:14 Page 16

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

No comments

Candy GO DC 68G Specifications Page 16