Candy GO L User Manual download pdf (Page 6)

“PROGRAMME LOCK” button

This is a useful feature to prevent children playing with the option buttons and tampering with

the programme you have set.

After you have set the programme and option buttons you require, press START button

and then hold down programme lock button for few seconds until the symbol “ ” will

appear on the display. This “locks” the control panel.

You may cancel this function by pressing the programme lock button for few seconds until the

symbol “ ” will disappear.

The option buttons should be selected before pressing the START button.

If an option is selected that is not compatible with the selected programme then the light

on the button first flashes and then goes off.

“PRE-WASH” button

This option is particularly useful for heavily soiled loads and can be used only on some

programmes as shown in the programmes table.

Detergent for this programme should be added to the compartment of the soap drawer labelled “1”

(Please refer to Detergent Drawer Section of manual). We recommend you use only 20% of the

recommended quantities shown on the detergent pack and fabric conditioner should not be used

for this programme.

“STAIN VANISH” Button

By pressing this button, which can only be activated in the Cotton cycles, the sensors in the

new system come into operation. They affect both the selected temperature, keeping it at a

constant level throughout the wash cycle, and the mechanical function of the drum.

The drum is made to turn at two different speeds at crucial moments. When the detergent

enters the garments, the drum rotates in such a way that the detergent is distributed in a

uniform manner; during the wash and rinse procedures, however, the speed increases in

order to maximise the cleaning action. Thanks to this special system, the efficiency of the

wash procedure is improved WITHOUT ANY INCREASE IN THE LENGTH OF THE

PROGRAM.

RINSE HOLD button

Pressing this button means the cycle stops at the final rinse stage, leaving the drum filled with

water.

The garments thus stay immersed in the water, preventing them from bunching up and

forming creases that are difficult to remove.

During the phase in which the water is held in the tub, the indicator blinks to show that the

machine is at a standstill. Release the button to end the cycle with a spin (which may be

reduced or cancelled using the appropriate button) and emptying phase.

“ALLERGY CARE” button

By pressing this button you can activate a special new wash cycle in the Cotton and Mixed

Fabrics programs, thanks to the new Sensor System. This option treats with care the fibres of

garments and the delicate skin of those who wear them.

The load is washed in a much larger quantity of water and this, together with the new combined

action of the drum rotation cycles, where water is filled and emptied, will give you garments which

have been cleaned and rinsed to perfection. The amount of water in the wash is increased so that

the detergent dissolves perfectly, ensuring an efficient cleaning action. The amount of water is also

increased during the rinse procedure so as to remove all traces of detergent from the fibres. This

function has been specifically designed for people with delicate and sensitive skin, for whom even

a very small amount of detergent can cause irritation or allergy.

You are advised to also use this function for children’s clothing and for delicate fabrics in general,

or when washing garments made of towelling, where the fibres tend to absorb a greater quantity of

detergent. To ensure the best performance for your wash, this function is always activated on the

Delicates and Woollens/Hand wash programs.

“EASY IRON” button

The Fast Iron function (Not available on COTTON programmes) minimizes creases as much

as possible with a uniquely designed anti-crease system that is tailored to specific fabrics.

MIXED FABRICS - the water is gradually cooled throughout the final two rinses with no

spinning and then a delicate spin assures the maximum relaxation of the fabrics.

DELICATE FABRICS – after the final two rinses with no spinning the machine stops in the

final rinse stage and the option indicators blink. The load is held in the water in the drum,

thus reducing creasing and enabling easier ironing.

WOLLENS/HAND WASH – after the final rinse the load is held in the water in the drum,

thus reducing creasing and enabling easier ironing and the option indicators blink.

To complete the cycle press the Easy Iron button and the machine will pump out the water

and complete the cycle.

If you do not want to spin the clothes and activate drain only:

- Turn the programme selector to the "OFF" position;

- Select programme drain only ;

- Switch on the appliance again by pressing the "Start/Pause" button.

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Comments to this Manuals

No comments

Candy GO L User Manual Page 6

Comments to this Manuals

Related products and manuals for Washers Candy GO L