Candy CBE165T-80 User Manual download pdf (Page 5)

PROGRAMME Selector

Note: never turn the dial anti-clockwise (Turn it

clockwise and do not press the on/off button before

selecting the programme.)

The tables in the washing section describe the various programmes and give the number or

symbol to select for them.

IMPORTANT : IF YOU NEED TO CHANGE A PROGRAMME THAT

HAS ALREADY STARTED – SWITCH OFF THE MACHINE BY THE

ON / OFF BUTTON AND THEN MOVE THE PROGRAMME DIAL

TO THE CORRECT POSITION. IF YOU DO NOT PRESS “OFF”

BEFOREHAND, THE DIAL WILL AUTOMATICALLY MOVE TO ITS

INITIAL POSITION.

WASH TEMPERATURE selector

Can be turned in either direction

This washing machine is equipped with this device for

setting the wash temperature you want. We recommend

that the temperature shown on the label inside garments

should never be exceeded.

The most suitable temperature and cycle for each type of

fabric is shown in the programme guide.

To protect fabrics, if the variable temperature dial has

accidentally been set higher than that stated in the

programme guide, the machine will lower the temperature automatically.

SUPER RINSE button

Press the button to select or deselect this function

This function will allow an extra rinse or more water added at the rinse stage – depending on

the programme selected. This is particularly important for avoiding skin irritation from

detergent residues for people with particularly sensitive skin.

The super rinse button is also recommended when washing heavily soiled fabrics, requiring

the use of a lot of detergent, or when washing items made of towelling, whose fibres have a

greater tendency to retain detergent.

INTENSIVE WASH button

Press the button to select or deselect this function

This function which is available on all cotton programmes is very useful for heavy soiling.

The temperature is kept constant throughout all the wash phases and the programme is

extended to ensure an extra deep cleaning performance.

RINSE-HOLD button

Press the button to select or deselect this function

Pressing this button (which operates only during the DELICATES and WOLLENS cycles.)

means the cycle stops at the final rinse stage, leaving the drum filled with water.

The garments thus stay immersed in the water, preventing them from bunching up and

forming creases that are difficult to remove.

When the button is reset the cycle ends with the water being pumped out followed by the spin

stage.

If only pumping out is required, without spin, to minimise creasing you must:

- switch off the machine (press the On/Off button);

- select programme Z;

- switch on the machine again (by pressing the On/Off button);

- reset the Rinse-hold button.

1 2 3 4 5 6 7 8 9 10 ... 16 17

Comments to this Manuals

No comments

Candy CBE165T-80 User Manual Page 5

Comments to this Manuals

Related products and manuals for Washers Candy CBE165T-80