Candy CGM 91 X User Manual download pdf (Page 14)

- 14 -

GENERAL

Carefully read the following important information

regarding installation safety and maintenance. Keep this

information booklet accessible for further consultations.

The appliance has been designed for use in the ducting

version (air exhaust to the outside – Fig.1B), filtering

version (air circulation on the inside – Fig.1A).

SAFETY PRECAUTION

1. Take care when the cooker hood is operating

simultaneously with an open fireplace or burner that

depend on the air in the environment and are supplied

by other than electrical energy, as the cooker hood

removes the air from the environment which a burner or

fireplace need for combustion. The negative pressure in

the environment must not exceed 4Pa (4x10-5 bar).

Provide adequate ventilation in the environment for a

safe operation of the cooker hood.Follow the local laws

applicable for external air evacuation.

Before connecting the model to the electricity

network:

- control the data plate (positioned inside the appliance)

to ascertain that the voltage and power correspond to

the network and the socket is suitable. If in doubt ask a

qualified electrician.

- If the cable is damaged, replace it as soon as possible

with another one which has the same characteristics and

which is suitable for use at the power level of the

appliance. This procedure must be performed by a

qualified technician.

- This device must be connected to the supply network

through either a plug fused 3A or hardwired to a 2 fase

spur protected by 3A fuse.

2. WARNING !

In certain circumstances electrical appliances may

be a danger hazard.

A) Do not check the status of the filters while the

cooker hood is operating

B) Do not touch bulbs or adjacent areas, during or

straight after prolonged use of the lighting

installation.

C) Flambè cooking is prohibited underneath the

cooker hood

D) Avoid free flame, as it is damaging for the filters

and a fire hazard

E) Constantly check food frying to avoid that the

overheated oil may become a fire hazard

F) Disconnect the electrical plug prior to any

maintenance.

G) This appliance should not be used by children, by

inexperienced individuals, or by individuals with

reduced capacities, unless they are supervised while

using the appliance or given instructions by someone

who is responsible for their safety.

H) Young children should be supervised to ensure

they do not play with the appliance

I) There shall be adequate ventilation of the room

when the rangehood is used at the same time as

appliances burning gas or other fuels

L) There is a risk of fire if cleaning is not carried out

in accordance with the instructions

This appliance conforms to the European Directive EC/

2002/96, Waste Electrical and Electronic Equipment

(WEEE). By making sure that this appliance is disposed

of in a suitable manner, the user is helping to prevent

potential damage to the environment or to public health.

The

symbol on the product or on the accompanying

paperwork indicates that the appliance should not be

treated as domestic waste, but should be delivered to a

suitable electric and electronic appliance recycling

collection point. Follow local guidelines when disposing

of waste. For more information on the treatment, re-use

and recycling of this product, please contact your local

authority, domestic waste collection service or the shop

where the appliance was purchased.

INSTALLATION INSTRUCTIONS

Assembly and electrical connections must be carried

out by specialised personnel.

• Electric Connection

The appliance has been manufactured as a class II,

therefore no earth cable is necessary.

The connection to the mains is carried out as follows:

BROWN = L line

BLUE = N neutral

If not provided, connect a plug for the electrical load

indicated on the description label. Where a plug is

provided, the cooker hood must be installed in order that

the plug is easily accessible.

An omnipolar switch with a minimum opening of 3mm

between contacts, in line with the electrical load and local

standards, must be placed between the appliance and

the network in the case of direct connection to the

electrical network.

• The minimum distance between the support surfaces

of the cooking pots on the cooker top and the lowest

part of the cooker hood must be at least 65 cm (Fig.10).

If a connection tube composed of two parts is used, the

upper part must be placed outside the lower part.

Do not connect the cooker hood exhaust to the same

conductor used to circulate hot air or for evacuating fumes

from other appliances generated by other than an

electrical source.

Before proceeding with the assembly operations, remove

the anti-grease filter(s) (Fig.6) so that the unit is easier

to handle.

- In the case of assembly of the appliance in the suction

version prepare the hole for evacuation of the air.

• We recommend the use of an air exhaust tube which

has the same diameter as the air exhaust outlet hole. If

a pipe with a smaller diameter is used, the efficiency of

the product may be reduced and its operation may

ENGLISH

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Comments to this Manuals

No comments

Candy CGM 91 X User Manual Page 14

Comments to this Manuals

Related products and manuals for Hoods Candy CGM 91 X